FORTNITE OPTIMIZED

GAMEPACK OVERVIEW

Fortnite Optimized v1.9.4 2019.10.15.

The Fortnite Optimized Gamepack for Battle Royale mode, is designed to be a streamlined pack that everyone can use, bringing together the best, most optimized mods, with quick access to the new Weapon Fire AI set and a revamped Build Assist Pro with more building mods than ever, so you can adapt to any situation on the fly.

Decimate them all as you snap to and track your opponents with AIM ABUSE.

With the WEAPON FIRE AI family, you can easily detect which weapon you are using and then use it at its best. You can quickly switch between Weapon Fire Mods at will.

With RAPID FIRE AI, fire your semi-automatic weapon at maximum speed, including a weapon detection feature to determine if a weapon needs Rapid Fire.

Combine AIM ABUSE with SMART FIRE AI for high precision controlled fire when picking off your opponents, including a weapon detection feature to provide the optimal fire rate.

With DUAL FIRE AI, detect your dual weapons and then quickly switch and fire between them, gaining an unexpected upper hand in combat that your opponents will struggle to predict.

Command the building space with BUILD ASSIST PRO for Builder Pro.

As of the latest Fortnite update, Legacy Controls MUST be ON to use this Gamepack.

Experience these mods and much more!

PACK OVERVIEW

GAMEPACK ACTIVATION

Select the Gamepack Slot: HOLD the top LEFT SELECT / PADDLE Button to navigate using EITHER PADDLE to CYCLE through the 8 GAMEPACK MODE SLOTS, represented by LEDs 1-8.

The GEAR HEAD EYES will be FLASHING back and forth.
- Your device will ONLY display the current GAMEPACK SLOT LED.

MASTER CONTROLS

MOD TOGGLE is the quickest way to suspend ALL MODS except Paddle Mods. This is helpful to keep mods designed for one gameplay function from interfering with another, for example, Crouch Aim interfering with Building, and it is helpful to suspend mods while you are accessing the in-game menu or lobby.

WHILE AIMING DOWN SIGHTS (default L2 / LT), TAP DOWN D-PAD to SUSPEND / RESUME All Mods except Paddle Mods (Suspended: Heavy Rumble / Resumed: Light Rumble).

MASTER QUICK CONTROL suspends the entire pack.

HOLD TOUCHPAD / VIEW & CROSS / A together for 1 second to SUSPEND / RESUME the entire pack (Suspended: Heavy Rumble / Resumed: Light Rumble).

PACK ACTIVATION

PACK SETUP

GAMEPACK SETUP

WARNING: VIBRATION ON REQUIRED in-game, as well as in your console's menu settings. Fortnite has it turned off in-game with its default settings so go in and fix this to ON.

If vibration or rumble from games is undesired, load up Mod Central, click on the top left Remapper section, then ensure BOTH Disable Rumble and Mirror Advanced Settings are CHECKED, then SAVE.

To configure this pack correctly so that mods are placed on the correct buttons and working optimally for your in-game sensitivity, MATCH the required settings in Mod Central, marked MATCH IN-GAME, to your current in-game settings.

USE THE FOLLOWING IN-GAME SETTINGS TO ENSURE THAT MODS WORK CORRECTLY:
For Controller Sensitivity, ONLY identical values are supported for the X/Y settings.
For Controller Building Sensitivity, ONLY increments of .250 are supported.
For Dead Zone, ONLY the default setting is supported.
Legacy Controls MUST be ON.

CUSTOM REMAPPING IS LARGELY UNSUPPORTED, but some popular requests are included. In this case, select a Builder Pro Custom option in Mod Central, then in-game, RESET the Custom option to Builder Pro and remap ONLY the following:

If you are using Builder Pro Custom RIGHT D-Pad Edit in Mod Central:
- Remap your RIGHT D-Pad to Edit (NOT Switch Mode) in-game Combat/Build Controls.

If you are using Builder Pro Custom LEFT STICK Edit in Mod Central:
- Remap your LEFT STICK to Edit (NOT Switch Mode) in-game Combat/Build Controls.
- Set "Sprint by Default" to On in the in-game settings.

If you are using Builder Pro Custom LEFT STICK Edit & Confirm in Mod Central:
- Remap your LEFT STICK to Edit (NOT Switch Mode) in-game Combat/Build Controls.
- Remap your LEFT STICK to Confirm in-game Edit Controls.
- Set "Sprint by Default" to On in the in-game settings.

If you are using Builder Pro Custom RIGHT STICK Jump in Mod Central:
- Remap your RIGHT STICK to Jump in-game Combat/Build/Edit Controls.
- Remap your CROSS / A Button to Crouch/Repair in-game Combat Controls, Rotate/Repair in game Build Controls, and Reset in-game Edit Controls.

If you wish to play with Flipped Bumper/Trigger Swap, select Builder Pro Custom Flipped in Mod Central, head over to the game, RESET the Custom option to Builder Pro, then remap the Combat/Build/Edit Controls to swap your bumpers with your triggers.

BUILD MODE TRACKING is ONLY for the Builder Pro button layout. When set to Enabled, it will track CIRCLE / B presses to prevent interference from mods while you are trying to build.

In Build Mode, a YELLOW LIGHTBAR / 4 WHITE LEDS will indicate mods are SUSPENDED. They are RESUMED when you exit Build Mode, but this can potentially DESYNC; just switch to your pickaxe or TAP TRIANGLE / Y to RESYNC.

Inventory will also be tracked; ALWAYS exit Inventory with CIRCLE / B to avoid DESYNC. Alternatives to Build Mode Tracking include the Build Assist Pro Paddle Mod, Mod Toggle, Master Quick Control, or Paddle Mod alternatives.

LAG COMPENSATION is a setting for players with higher pings (100+). If weapons skip shots or building mods desync, MATCH IT TO YOUR AVERAGE PING. This slows down time sensitive mods in an attempt to get them working but it is NOT a guaranteed fix.

MENU MODE NAVIGATION

We HIGHLY RECOMMEND setting up all mods in the Mod Central config, but advanced users are welcome to access the Class Mods from the GamePack Menu Mode:

WEAPON FIRE

CLASS 1 – WEAPON FIRE AI

When Rapid Fire AI is ON, HOLD down the Attack Button to fire semi-automatic weapons at maximum speed.

Automatically determine whether your current weapon is suitable with Rapid Fire AI:
- See Weapon Fire AI Detection.

When Smart Fire AI is ON and you have detected your current weapon, FULLY HOLD down the Aim Down Sights Button (default LEFT TRIGGER) and the Attack Button to automatically control your fire rate while you are moving slowly or stationary, which significantly improves ranged accuracy.

You should set Aim Abuse to Enabled to maximize the accuracy of Aim Abuse compatible weapons (Aim Abuse will be automatically disabled for some weapons).
You MUST detect your current weapon with Smart Fire AI to apply the correct fire rate:
- See Weapon Fire AI Detection.

When Dual Fire AI is ON and you have detected your current dual weapons, you can do what pro players have mastered, which is switching and firing between dual weapons to maximize damage output in close range battles.

You MUST be using either the Builder Pro or Combat Pro button layout.
You MUST arrange your inventory with 2 weapons in slots side by side.
You MUST detect your current dual weapons with Dual Fire AI:
- See Weapon Fire AI Detection.
- A good choice is a shotgun in the left slot and a submachine gun in the right slot.

Remember to select the weapon in the left slot before entering combat. While Aiming Down Sights (default LEFT TRIGGER), HOLDING down the Attack Button switches and fires between dual weapons.

Weapon Fire AI Detection REQUIRES that you are clear and away from any vibrations, action, enemies, grenades and the storm. You MUST have at least a reload remaining to ensure correct weapon detection.

Rapid Fire AI Detection:
- HOLD Aim Down Sights (default LEFT TRIGGER) & LEFT D-Pad together until your weapon test fires.
Smart Fire AI Detection:
- HOLD Aim Down Sights (default LEFT TRIGGER) & UP D-Pad together until your weapon test fires.
Dual Fire AI Detection:
- With 2 weapons in slots side by side, select the weapon in the left slot, then:
- HOLD Aim Down Sights (default LEFT TRIGGER) & RIGHT D-Pad together until both weapons test fire.

Weapon Fire Quick Shortcuts: While Aiming Down Sights (default LEFT TRIGGER),

Rapid Fire: TAP the LEFT D-Pad (ON: 1 Heavy Rumble / OFF: Light Rumble).
Smart Fire: TAP the UP D-Pad (ON: 2 Heavy Rumbles / OFF: Light Rumble).
Dual Fire: TAP the RIGHT D-Pad (ON: 3 Heavy Rumbles / OFF: Light Rumble).

Note that if you have just detected your weapon, the mod will already be ON.

Mod Toggle Quick Control: While Aiming Down Sights (default LEFT TRIGGER),

All Mods (except paddle mods): TAP the DOWN D-Pad.
- SUSPENDED: Heavy Rumble / RESUMED: Light Rumble.
- Examples when you may wish to SUSPEND mods: vehicles, pickaxe, building, in game menu or lobby.

Weapon Fire Activation: Weapon Fire mods while highly effective, are not practical in all scenarios. This Mod Central setting fully utilizes the RIGHT TRIGGER to provide you with more control over when they will be activated.

With Always Activated, if the RIGHT TRIGGER is HELD in any way, your Weapon Fire mod will be ACTIVATED.

With Fully Hold Activation, if the RIGHT TRIGGER is FULLY HELD all the way down, your Weapon Fire mod will be ACTIVATED. With Fully Hold Activation, you can still use your pickaxe without toggling OFF the Dual Fire mod.

With Fully Hold Blocked, if the RIGHT TRIGGER is FULLY HELD all the way down, your Weapon Fire mod will be BLOCKED.

Weapon Fire Shortcuts (Setting):

Changing this Mod Central setting is a last resort for users that keep accidentally activating mod shortcuts during gameplay.

With AI Detection & Quick Shortcuts, this is the fully featured default and recommended setting. Detect your weapon for each Weapon Fire mod, then use the Quick Shortcuts to switch between all 3 mods. Quickly suspend or resume all mods as you need to. While you are aiming down sights, you can still ping with the OPTIONS/MENU Button.

With AI Detection Only, Weapon Fire AI Detection will remain, Weapon Fire Quick Shortcuts will be removed, and Mod Toggle will be HOLD Aim Down Sights (default LEFT TRIGGER) & DOWN D-Pad together for 1 second to SUSPEND/RESUME all mods.

AIM ABUSE

CLASS 2 – AIM ABUSE

When Aim Abuse is ON, whenever you are FULLY HOLDING the Aim Down Sights Button (default LEFT TRIGGER) all the way down, you will snap to, be assisted towards and effectively track your current target. Aim Abuse can still track up roughly 200m in ideal scenarios.

When Aim Abuse on Fire is ON, the same as above applies, but you will also need to be firing for it to activate. With this, it is more discreet, and you can ensure you are fully aimed on the target before activating it, but you may miss out on some random moments where it ends up snapping to an otherwise unnoticed target in moment to moment gameplay.

Aim Abuse has a learning curve. Please follow all of the points below so that you can understand how to both use it and maximize its effectiveness:

The in game AIM ASSIST setting MUST be set to ON.
MATCH all in game sensitivities in Mod Central. See the GamePack Setup section.
A stable internet connection is recommended, ideally with an average ping under 40.
A subtle aiming in and out with slight camera shaking is normal behavior.
Aim Abuse is an assist; NOT an aimbot. Once it snaps to a target, you have to keep your aim nudged towards the direction your target is moving in for your shots to hit.
Limit your own movement speed where practical, especially at range.
Space out your shots at range, or use Smart Fire AI.
Aim Abuse CANNOT be used with scoped weapons, but if the LEFT TRIGGER is LESS than fully held, you can still scope in to take the shot.
Aim Abuse interferes with vehicle braking, but if the LEFT TRIGGER is LESS than fully held, you will brake normally.
For the Aim Abuse Mode setting in Mod Central, we recommend Adaptive which changes Aim Abuse speed based on camera movement. There is also Dynamic which changes Aim Abuse speed based on fire trigger pressure and various fixed speeds based on individual preferences. Different settings may suit different players.

SHOT MODE

CLASS 3 – SHOT MODE

When Crouch Aim is ON, whenever you are FULLY HOLDING the Aim Down Sights Button (default LEFT TRIGGER) all the way down, you will crouch, which improves the accuracy of your shots. You will stand upon release. Consider moving your Rotate Piece Button.

When Hop Shot is ON, whenever you are FULLY HOLDING the Attack Button (default RIGHT TRIGGER) all the way down, you will bunny hop, which makes you difficult to hit.

When Rapid Crouch on Fire is ON, whenever you are FULLY HOLDING the Attack Button (default RIGHT TRIGGER) all the way down, you will rapidly crouch and fire, which makes you difficult to hit.

When Rapid Crouch Aim is ON, whenever you are FULLY HOLDING the Aim Down Sights Button (default LEFT TRIGGER) all the way down, you will rapidly crouch, which makes you difficult to hit. Consider moving your Rotate Piece Button.

While Aiming Down Sights (default LEFT TRIGGER), TAP the DOWN D-Pad for Mod Toggle to SUSPEND/RESUME all mods, except paddle mods.
- SUSPENDED: Heavy Rumble.
  - RESUMED: Light Rumble.
  - This is a clean and simple solution to mods interfering with in game actions. Without this, or Build Mode Tracking, these mods will rotate your building pieces.

PADDLE MODS

CLASS 4 & 5 – PADDLE MODS

When Class 4 is ON, LEFT PADDLE will activate your chosen paddle mod.

When Class 5 is ON, RIGHT PADDLE will activate your chosen paddle mod.

TAP PADDLE TO JUMP can be enabled for either or both paddles in Mod Central. QUICKLY TAP & RELEASE the PADDLE to jump. HOLD the PADDLE to perform your assigned Paddle Mod.

"Jump Activation Window" determines how quickly you will need to TAP & RELEASE to JUMP. The default 250 is a safe value, but if you have a quicker reaction time you may find that lower values suit your play style better.

WEAPON FIRE AI DETECTION REQUIRES that you are clear and away from any vibrations, action, enemies, grenades and the storm. You MUST have at least a reload remaining to ensure correct weapon detection.

For Smart Fire AI, WHILE PRESSING & HOLDING L3 / LS, TAP YOUR SMART FIRE AI PADDLE and your weapon will do a quick test fire.
For Dual Fire AI, arrange your inventory so that your dual weapons are side by side, select the weapon in the left slot, then WHILE PRESSING & HOLDING L3 / LS, TAP YOUR DUAL FIRE AI PADDLE and your weapons will do a quick test fire.

Help Videos: Paddle Mod (Tap Paddle to Jump is now compatible with all Paddle Mods).

BUILD ASSIST PRO FEATURES

Here is the full feature set of the Build Assist Pro Paddle Mod. Please make sure that you have fully read the GamePack Setup section of this manual.

Spring Loaded Build Mode. Build Assist Pro (also Build Assist) ONLY enters and stays in Build Mode for as long as you are HOLDING the Build Assist Pro PADDLE. Once you are accustomed to this change, it can be far more convenient than taking your thumb off the Right Stick to open Build Mode with Circle / B, only to do it again to close it.

Mod Friendly. Build Assist Pro (also Build Assist) automatically blocks all mods that are not building related for as long as you are HOLDING the Build Assist Pro PADDLE to stay in Build Mode. This allows you to use any mod without fear of it interfering when you try to build.

Safety Bunker can be set in the Mod Central config under Build Assist Pro Square/X or Triangle/Y Mod. It allows you to quickly build a small hut to provide cover so that you can heal yourself or revive a teammate. Have enough materials, and be aligned north, east, south, or west, on even ground. While HOLDING the Build Assist Pro PADDLE, be close to the wall blueprint and point in the middle of the 4 icons, then TAP the ACTIVATION Button to build the bunker.

Quick 90 can be set in the Mod Central config under Build Assist Pro Square/X or Triangle/Y Mod. It allows you to quickly change direction on a ramp, massively boosting your building mobility. If you are building ramps, you should have plenty of building materials. While HOLDING the Build Assist Pro PADDLE, run up the opposite side of the ramp to the side that you wish to turn, so if you want to turn right, run up the left side, and if you want to turn left, run up the right side. When you reach the top of the ramp, TAP the ACTIVATION Button then FLICK the RIGHT STICK left or right to determine your direction. You will automatically build a protective wall and a ramp up in that direction.

Infinite Fort can be set in the Mod Central config under Build Assist Pro Square/X or Triangle/Y Mod. It allows you to keep building up fort levels to gain the high ground. Have plenty of building materials, and be aligned north, east, south, or west, on even ground. While HOLDING the Build Assist Pro PADDLE, be close to the wall blueprint and point in the middle of the 4 icons, then HOLD the ACTIVATION Button to build the fort.

Rapid Ramp can be set in the Mod Central config under Build Assist Pro Square/X or Triangle/Y Mod. It allows you to build a continuous chain of reinforced ramps. Have plenty of building materials, and be aligned north, east, south, or west, on even ground. While HOLDING the Build Assist Pro PADDLE, look slightly down; roughly 30 degrees, so you can see the ramp that will be placed under you. Getting the right angle can take some practice. HOLD the ACTIVATION Button and simply run forward while remaining looking slightly down.

Window Shot & Edit Shot can be set in the Mod Central config under Build Assist Pro Square/X or Triangle/Y Mod. These mods allow you to quickly create a window in a building piece, take a shot through it, and then reset the building piece in one motion; ideal with a shotgun or hand cannon. If there is no existing building piece, the mod will create one for you. Window Shot works specifically with wall pieces, whereas Edit Shot will work with either wall or floor pieces.
While HOLDING the Build Assist Pro PADDLE, and looking at the building piece that you wish to edit, TAP the ACTIVATION Button to perform the action. Note that being too close to the building piece will prevent it from resetting afterwards. And if you HOLD the ACTIVATION Button instead, you can time when to confirm the edit, so that you can wait for your opponent to be on the other side of the building piece.

Fast Reset can be set in the Mod Central config under Build Assist Pro Square/X or Triangle/Y Mod. It allows you to quickly reset a build edit on a structure, such as filling in a window to make it a solid wall. While HOLDING the Build Assist Pro PADDLE, look at the edited building piece that you wish to reset, then TAP the ACTIVATION Button.

Insta Trap can be set in the Mod Central config under Build Assist Pro Square/X or Triangle/Y Mod. It allows you to instantly place your current trap. While HOLDING the Build Assist Pro PADDLE, TAP the ACTIVATION Button. Note that regardless of this setting, this mod is also available on the OPTIONS/MENU Button, so you may wish to pick something else.

Wall Ramp can be set in the Mod Central config under Build Assist Pro Square/X or Triangle/Y Mod. It allows you to quickly build a wall with a ramp for you to peak over. Have enough building materials, and be aligned north, east, south, or west, on even ground. While HOLDING the Build Assist Pro PADDLE, be close to the wall blueprint and point in the middle of the 4 icons, then TAP the ACTIVATION Button to build the wall ramp.

Safety Net 2.0 (Waterfall) is always available. It allows you to safely make your way down from a high place. Have plenty of building materials or you will run out and take fall damage, and be aligned north, east, south, or west. While HOLDING the Build Assist Pro PADDLE, TAP the DOWN D-Pad. You will automatically look down. Carefully begin moving backwards, and aim to land on the top half of the upcoming ramp to avoid taking damage. Do NOT look up until you reach the ground as this will deactivate the mod.

Smart Edit is always available. It allows you to use the Edit Button to edit whichever building piece you are currently looking at, as opposed to the piece you have selected.

Switch Trap & Insta Trap are always available.
While HOLDING the Build Assist Pro PADDLE:
To instantly switch your current trap, TAP the RIGHT D-Pad.
This is NOT compatible with the in game Builder Pro: Build Immediately setting.
To instantly place your current trap, TAP the OPTIONS/MENU Button.

Stance Change is always available. It allows you to toggle your crouch status while building. While HOLDING the Build Assist Pro PADDLE, TAP the UP D-Pad.

BUILD ASSIST PO

QUICK MODS

MOD TOGGLE is helpful if mods designed for a specific action are interfering with building or vehicles for that matter. This control does NOT affect your paddle mods.

While Aiming Down Sights (default LEFT TRIGGER), TAP the DOWN D-Pad for Mod Toggle to SUSPEND/RESUME All Mods, except Paddle Mods.
- SUSPENDED: Heavy Rumble / RESUMED: Light Rumble.